- Category
- Vehicle
- Agency
- NHTSA
- Hazard
- Braking
- Issued
- December 6, 2012
- Recall ID
- 12V566000
Itasca Ellipse Recall: redundant Winnebago Industries Inc. - Braking (Dec 2012)
What you should do
- Read the official announcement before driving. If you notice a change in how the brakes feel, increased pedal travel, or a warning light, stop driving and arrange recovery rather than driving to a dealer. The repair is free.
- Daimler Trucks North America will be conducting the recall on behalf of Winnebago Industries. Daimler will notify owners, and dealers will inspect the the diode jumpers to make sure they are fully locked in place and will correct the vehicles as needed. The recall began December 26, 2012. Owners should contact Winnebago at 1-641-585-3535 or Daimler Trucks at 1-503-745-6910.
redundant Winnebago Industries Inc. is recalling certain 2010–2013 Itasca Ellipse, 2010–2013 Itasca Meridian, 2010–2013 Winnebago Journey and 1 other model. The chassis are equipped with connectors for diode jumpers that may come loose, resulting in an open circuit. Two circuits are affected… Daimler Trucks North America will be conducting the recall on behalf of Winnebago Industries.
Check your vehicle
Compare the year, make and model on your vehicle against every row below.
| Make | Model | Model years |
|---|---|---|
| Itasca | Ellipse | 2010–2013 |
| Itasca | Meridian | 2010–2013 |
| Winnebago | Journey | 2010–2013 |
| Winnebago | Tour | 2010–2013 |
What happened
Winnebago Industries is recalling certain model year 2010-2013 Winnebago Journey and Tour motorhomes, and certain model year 2010-2013 Itasca Meridian and Ellipse motorhomes, manufactured June 18, 2010, through November 17, 2011. The chassis are equipped with connectors for diode jumpers that may come loose, resulting in an open circuit. Two circuits are affected: The one that disengages the cruise control with brake pedal use, and the one that illuminates the brake lights with brake pedal use.
Recall facts
- Manufacturer
- redundant Winnebago Industries Inc.
- Vehicles affected
- 1,521
- NHTSA campaign
- 12V566000
- Severity
- High
Common questions
Which vehicles are affected?
- 2010–2013 Itasca Ellipse
- 2010–2013 Itasca Meridian
- 2010–2013 Winnebago Journey
- 2010–2013 Winnebago Tour
What is the defect?
Winnebago Industries is recalling certain model year 2010-2013 Winnebago Journey and Tour motorhomes, and certain model year 2010-2013 Itasca Meridian and Ellipse motorhomes, manufactured June 18, 2010, through November 17, 2011. The chassis are equipped with connectors for diode jumpers that may come loose, resulting in an open circuit. Two circuits are affected: The one that disengages the cruise control with brake pedal use, and the one that illuminates the brake lights with brake pedal use.
What is the danger?
Failure of the cruise control to disengage when the brakes are applied may increase the risk of a vehicle crash. Without the brake lights illuminating when the brakes are applied, the driver's intent is not communicated, increasing the risk of a crash.
What should I do?
Daimler Trucks North America will be conducting the recall on behalf of Winnebago Industries. Daimler will notify owners, and dealers will inspect the the diode jumpers to make sure they are fully locked in place and will correct the vehicles as needed. The recall began December 26, 2012. Owners should contact Winnebago at 1-641-585-3535 or Daimler Trucks at 1-503-745-6910.
How many vehicles are affected?
1,521 vehicles are affected by this recall.
Where can I find more information?
Read the official NHTSA recall announcement, or browse all current vehicle recalls.